All dates and registration for the workshops can be found here.

Register  now

Are you already an expert in laser cutting or would you like to become one? Then you've come to the right place! In this course, we will immerse you in the fascinating world of laser cutting and show you how you can easily create your own designs in a wide variety of materials.

We start with the most important safety instructions to ensure responsible use of the laser cutter. We will then give you a comprehensive overview of how to operate the laser cutter and the associated software. You will learn how to get the best out of this impressive technology.

If you like, you are welcome to bring your own components - so you can put what you have learned directly into practice. Look forward to proudly holding your own little project in your hands at the end of the day!

What can you expect on the introductory course?

•     Important safety instructions for using the laser cutter
•     Detailed introduction to the operation of the laser cutter and the software
•     Opportunity to bring and implement your own components

Questions that we answer in the course:

•     What materials can be used for laser cutting?
•     Practical instructions on how to operate a laser cutter

What do you need for the introductory course?

•     Your own laptop
•     The software for the laser cutter can be downloaded free of charge in advance from the manufacturer's website.

Duration:

The workshops last 1 hour 30 minutes each.

Where does the introductory course take place?

The course will be held in MakerSpacES! in building 2 (room S 02.014). The entrance is via the fire escape in the inner courtyard (Tiefhof) between buildings 1 and 2.

Prepare to turn your creative ideas into reality and look forward to an instructive day of laser cutting!

Do you have any questions? Or would you like an individual appointment? Then please contact Simone Groß (Simone.Groß[at]hs-esslingen.de).

All dates and registration for the workshops can be found here.

Register  now

Look forward to immersing yourself in the fascinating world of embroidery and getting to know the possibilities of an embroidery machine. Here are the detailed contents of our workshop:

1. Embroidery machine basics:

•     Introduction to how an embroidery machine works.
•     Overview of the necessary tools and materials.

2. Preparation:

•     Explanation using a prepared embroidery file:
•     Creating embroidery templates: manual designs or digital designs.
•     Loading and adjusting embroidery files in the machine.

3. Embroidery process:

•     Placement of the embroidery hoop and the material to be embroidered.
•     Selecting the embroidery file and adjusting the settings.
•     Starting the embroidery process and monitoring the progress.

4. Materials and thread:

•     Information on different embroidery materials and threads.
•     Tips for selecting suitable materials for different projects.

5. Fine tuning:

•     Optimization of embroidery designs based on the results.
•     Adjustment of embroidery parameters if required.

6. Care and maintenance:

•     Proper cleaning and care of the embroidery machine.
•     Troubleshooting simple problems and maintenance tips.

Questions that will be answered in the course:

•     How do I create effective embroidery designs?
•     Which materials are suitable for the embroidery machine?
•     How can I optimize the embroidery process?
•     What care does the embroidery machine need?

What do I need for the introductory course?

•     Your own embroidery material, if available.
•     Optional: your own embroidery files or designs.

Duration:

The workshops last 2 hours each.

Where does the introductory course take place?

The MakerSpacES! is located in building 2 (S 02.014). The entrance is via the fire escape in the inner courtyard (underground courtyard) between buildings 1 and 2.

All dates and registration for the workshops can be found here.

Register  now

Welcome to the introductory screen printing course!

Immerse yourself with us in the fascinating world of screen printing and discover the many possibilities of this creative printing technique. Here are the detailed contents of our workshop:

Join us and print your own T-shirt!

1. The basics of screen printing:

•     What is screen printing and how does the process work?
•     Overview of the tools and materials required.

2. Preparation:

•     Explanation of how to create a screen using a pre-made screen:
•     Creating artwork: manual drawings or digital designs.

3. Printing process:

•     Placement of the screen over the material to be printed.
•     Application of ink to the screen.
•     Squeegee to distribute the ink evenly.
•     Drying of the printed material.

4. Fine tuning:

•     Optimization of the print image based on the results.
•     Adjustment of exposure or printing process if required.

5. Cleaning:

•     Thorough cleaning of the screen and tools after the printing process.

6. Applications of screen printing:

•     Textile printing: designing t-shirts, bags, etc.

Questions that will be answered in the course:

•     How do I create effective artwork?
•     Which materials are suitable for screen printing?
•     How can I optimize the printing process?
•     What problems can occur and how do I solve them?

What do I need for the introductory course?

•     Clothing that can get dirty.

Duration:

• The workshops last 2 hours each.

Where does the introductory course take place?

The MakerSpacES! is located in building 2 (S 02.014). The entrance is via the fire escape in the inner courtyard (underground courtyard) between buildings 1 and 2.

All dates and registration for the workshops can be found here.

Register now

In this workshop, we will dive into the world of woodworking together. You will be sanding prefabricated wooden blanks with your own hands, perhaps also drilling and screwing. You can then design the finishing touches with colorful acrylic paints or an appealing wood oil. Let your imagination run wild and create your very own work of art!

No previous knowledge is required and I am always available to answer any questions and provide assistance.

A few words about me: My name is Sabine Henne-Pitzinger and I have been running my wood workshop in Hochdorf for 25 years. As a trained carpenter, I not only make my own products and small pieces of furniture, but also like to pass on my knowledge in workshops, including children's birthday parties.

I would be very happy if you feel addressed to this workshop and participate with enthusiasm. Together we will spend a creative time in my wood workshop and create unique works of art.

Look forward to an inspiring and handcrafted experience!

Important:

Material costs per participant (including students) are 10 euros. Please bring to the appointment.

Duration:

Each workshop lasts 2 days and 3 hours.

Where does the introductory course take place?

The MakerSpacES! is located in building 2 (S 02.014). The entrance is via the fire escape in the inner courtyard (Tiefhof) between buildings 1 and 2.

All dates and registration for the workshops can be found here.

Register  now

This workshop is specifically designed for sewing beginners and offers a great opportunity to immerse yourself in the world of sewing. Each workshop begins with a detailed introduction to the sewing machine to ensure that every participant is well prepared.

Here are the two fascinating projects we will be making together:

1. Upcycling old jeans
We will sew bags and backpacks together from old jeans. Inspiring photos from Pinterest will serve as a starting point for our creativity. Learn how to conjure up stylish and practical accessories from seemingly unused jeans using simple sewing techniques.

2. Transform men's shirts into cushion covers
A particularly exciting project for our workshop is sewing cushion covers from men's shirts. We will show you step by step how to make stylish and individual cushion covers from old men's shirts. This upcycling idea will give the shirts a new lease of life and add a personal touch to your home.

Whether you are a beginner or an experienced sewer, this workshop is the perfect opportunity to expand your sewing skills and realize creative projects.

Duration:

The workshops last 3 hours each.

Where does the introductory course take place?

The MakerSpacES! is located in building 2 (S 02.014). The entrance is via the fire escape in the inner courtyard (Tiefhof) between buildings 1 and 2.

We know that convincing people on stage can be a particular challenge, and this is exactly where we come in.

In this workshop, we focus specifically on the needs and strengths of female founders. Experienced coaches will guide you through practical exercises aimed at finding your authentic voice and presenting your business story powerfully. We will take an in-depth look at the key elements of a successful pitch, from storytelling strategy to self-presentation.

The workshop will take place in presence in the MakerSpacES! of GründES!

Participation in the workshop is only possible for EXIST-Women scholarship holders (registration information via Notion). Open workshops will be announced in due course,

For more information please contact Lisa Stoll (lisa.stoll@hs-esslingen.de).

Welcome to ProtoDesign, the workshop designed specifically for creative and visionary female founders who want to bring their ideas to life through prototyping!

In this hands-on workshop, you will discover the world of prototyping and learn techniques to turn your innovative concepts into tangible reality. Make connections with other female founders, exchange ideas and be motivated by the inspiring ideas of the other participants!

The workshop will take place in presence at the MakerSpacES! of GründES!

Participation in the workshop is only possible for EXIST-Women scholarship holders (registration information via Notion). Open workshops will be announced in due course,

For more information please contact Lisa Stoll (lisa.stoll@hs-esslingen.de).